the simplest way of checking whether gas/fuel or spark is the reason for a car engine failure to start.
to determine if the whole electrical system is producing an electrical current to reach the tip of your spark plug so that the air fuel mixture in the combustion chamber will produce, here is a very simple way.
Simply, remove all the spark plug cable from the spark plug then put or insert a spark plug on each and every end of the spark cable ( you can remove the spark plug on your engine), then start the car, you should see a heavy spark on every tip of the spark plug, in which case you can assume that the computer is functional and is triggering the IGNITER to send a signal to the IGNITION COIL to the rotor to the spark plug cable to the spark plug.
If while you are looking the every tip of the spark , you notice that all has no spark coming out of the tip of the spark plug, then , the SPARK PLUG CABLE, THE ROTOR, THE IGNITION COIL , THE IGNITER, OR THE COMPUTER HAS A PROBLEM., BUT if some of the spark plug is not having a spark then most likely the cable, the terminal post inside the distributor cap is the trouble
No comments:
Post a Comment